Qingdao Lehua Technology Co., Ltd.

Lehua paint to refresh the world
Industrial anticorrosive paint with water bottom surface

Industrial anticorrosive paint with water bottom surface

Product introduction
This product by the modified resin, waterborne antirust pigments, additives and water processed by modulation, has the advantages of safety, environmental protection, good film properties, low temperature film into dense, strong adhesion, excellent salt fog resistance, single component packaging, convenient construction.
Use
Suitable for automobile chassis, automobile axle, oil pipelines, gas pipelines and other industrial protective coating of steel structure. It is the best upgrading product of traditional solvent alkyd paint, acrylic paint and chlorinated rubber paint.
Product data
Dry time table, h/25 is less than or equal to 0.5 DEG C
Work time, h/25 is less than or equal to 24 DEG C or 80 DEG C * 30min
The adhesion level is less than or equal to 1
Impact resistance, CM 50
Salt spray resistance 120h film without blistering, peeling, rust
Theoretical spreading rate (0.25kg/m2 dry film thickness of 50 m)
Construction technology:
1, before the construction of the bottom surface of the oil, dust, rust and other impurities should be cleaned, recommended sand or shot blasting;
2, before the construction of the paint mixing evenly, should be based on the painting process requirements, add appropriate amount of clean tap water dilution, the amount of 5-15%, recommended air spray, can also be painted or roller coating;
3, the proposed construction of the road, the coating interval is generally 24h (25 degrees C), when the next brush, should be in the next film drying after the construction of the next two;
4, is strictly prohibited contact with oily substances, while the ambient temperature is below 5 degrees C or humidity is greater than 75%, can not be constructed.
5, the end of construction, the appliance should immediately rinse with water, to prevent dry (some solid using organic solvent cleaning), the remaining paint should be kept closed, if the crust, affect the use, can be used in front with 200 mesh mesh filter.
Storage period
Should be stored at 5 to 30 degrees in the dry and ventilated place sealed preservation, storage period of 6 months.
Packing specification 20kg/ barrel
Statement: paint many factors in construction directly affects the coating effect and service life, the information and data are based on our experimental testing and actual use of the experience accumulated for the construction, when we do not understand the situation, we can only guarantee the quality of the paint. The above data are subject to change, subject to the company's latest specifications, without prior notice.