Qingdao Lehua Technology Co., Ltd.

Lehua paint to refresh the world
Water based industrial anticorrosive paint

Water based industrial anticorrosive paint

Product introduction
The product is made of waterborne industrial paint resin, water-based special antirust pigments and fillers, additives and water through refined processing, has the advantages of safety, environmental protection, low temperature characteristics of good film, primer and paint into densecoating various substrates with good adhesion and salt spray performance, single component packaging construction is convenient.
Use
Mainly used in machinery and equipment, building steel structure, chemical pipes, automobile chassis, axle and other parts of the protective and decorative painting, is a substitute for the best upgrading of traditional solvent based alkyd paint, acrylic paint and chlorinated rubber paint. At the same time, the paint film can also be matched with a variety of solvent based products, and there will be no problem of bottom and interlayer adhesion.
Product data
Primer paint
Dry time table, C = 0.5 h/25 = 0.5
Work time, h/25 is less than or equal to 24 DEG C or 80 DEG C * 20min = 24 or 80 DEG C * 30min
The adhesion level is less than or equal to 1 is less than or equal to 1
Pencil hardness HB HB
% - more than 75 gloss, or specified gloss
Impact resistance, CM 5050
Theoretical spreading rate, 0.30 kg/m2 (dry film thickness 50 (0.25 m) dry film thickness 50 m)
Construction technology:
1, before the construction of the bottom surface of the oil, dust, rust and other impurities should be cleaned, recommended sand or shot blasting;
2, before the construction of the paint mixing evenly, should be based on the painting process requirements, add appropriate amount of clean tap water dilution, the dosage of 5 ~ 15%, recommended air spray, also can brush or roller coating;
3, the construction of the two recommended primer and top coat, each interval is generally 24h (25 DEG C), brushing the next, then a construction should be in the film after drying;
4, is strictly prohibited contact with oily substances, while the ambient temperature is below 5 degrees C or humidity is greater than 70%, can not be constructed.
5, the end of construction, the appliance should immediately rinse with water, to prevent dry (some solid using organic solvent cleaning), the remaining paint should be kept closed, if the crust, affect the use, can be used in front with 120 mesh mesh filter.
Storage period
Should be stored at 5 to 30 degrees in the dry and ventilated place sealed preservation, storage period of 6 months.
Packing specification 20kg/ barrel
Statement: paint many factors in construction directly affects the coating effect and service life, the information and data are based on our experimental testing and actual use of the experience accumulated for the construction, when we do not understand the situation, we can only guarantee the quality of the paint. The above data are subject to change, subject to the company's latest specifications, without prior notice.