Product introduction
Two component waterborne anticorrosive coating of this product by the waterborne epoxy resin, waterborne epoxy curing agent, special antirust pigments and fillers, additives and water through refined processing, has the characteristics of safety, environmental protection, low odor, primer and paint into fast dry film, strong adhesion, excellent resistance to salt fog.
Use
Mainly used for coating mechanical equipment, construction steel structure, chemical pipe and other parts of the product, is the best, the upgrading of traditional solvent epoxy coatings and paint film after work with a variety of solvent products supporting without adhesion of bite bottom and interlayer.
Product data
Primer paint
Dry time table, C = 2 h/25 = 2
Work time, h/25 is less than or equal to 24 DEG C or 80 DEG C * 30min = 24 or 80 DEG C * 30min
The application period, H = 3 = 3
The adhesion level is less than or equal to 1 is less than or equal to 1
Impact resistance, CM 5050
The hardness of HB is more than H
Theoretical spreading rate, 0.35 kg/m2 (dry film thickness 60 (0.25 m) dry film thickness 50 m)
Water resistance, H = 480 = 600
Construction technology:
1, before the construction of the bottom surface of the oil, dust, rust and other impurities should be cleaned, recommended sand or shot blasting;
2, construction before the A and B components mixing evenly, and then according to the provisions of the proportion for paint mixing, at the same time, should according to the requirements of the coating way, add the right amount of clean tap water dilution, dosage is 5-10%, the recommended air spray;
3, the construction of the two recommended primer and top coat, each interval is 24h (25 degrees), can also be used with solvent type topcoat coating, after brushing a road, construction should be again in the preceding film after drying;
4, is strictly prohibited contact with oily substances, while the ambient temperature is below 5 degrees C or humidity is greater than 75%, can not be constructed.
5, the end of construction, the appliance should immediately rinse with water, to prevent dry (some solid using organic solvent cleaning), the remaining paint should be kept closed, if the crust, affect the use, can be used in front with 100 mesh mesh filter.
Storage period
Should be stored at 5 to 30 degrees in the dry and ventilated place sealed preservation, storage period of 6 months.
Statement: paint many factors in construction directly affects the coating effect and service life, the information and data are based on our experimental testing and actual use of the experience accumulated for the construction, when we do not understand the situation, we can only guarantee the quality of the paint. The above data are subject to change, subject to the company's latest specifications, without prior notice.
